<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">% \iffalse
% $Id: imprintmtshadow.dtx,v 1.3 2012-08-11 20:19:26 boris Exp $
%
% Copyright (c) 2012, Boris Veytsman
%
% All rights reserved.
%
% Redistribution and use in source and binary forms, with or without
% modification, are permitted provided that the following conditions
% are met: 
%
%    * Redistributions of source code must retain the above copyright
%    notice, this list of conditions and the following disclaimer. 
%    * Redistributions in binary form must reproduce the above
%    copyright notice, this list of conditions and the following
%    disclaimer in the documentation and/or other materials provided
%    with the distribution. 
%    * Neither the name of the original author nor the names of the
%    contributors may be used to endorse or promote products derived
%    from this software without specific prior written permission. 
%
% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
% CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
% INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
% MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
% DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
% BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
% EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
% TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
% DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
% ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
% OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
% OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
% POSSIBILITY OF SUCH DAMAGE.
%
% \fi 
% \CheckSum{221}
%
%
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&amp;
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \&lt;
%%   Equals        \=     Greater than  \&gt;     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~} 
%
%
% \MakeShortVerb{|}
% \GetFileInfo{imprintmtshadow.dtx}
% \title{\LaTeX{} Support For Monotype Imprint Shadow Font}
% \author{Boris Veytsman\thanks{%
% \href{mailto:borisv@lk.net}{\texttt{borisv@lk.net}},
% \href{mailto:boris@varphi.com}{\texttt{boris@varphi.com}}}} 
% \date{\filedate, \fileversion}
% \maketitle
% \begin{abstract}
%   This package provides \LaTeX{} support for the Monotype Imprint
%   Shadow font. It has everything you need to
%   typeset in this font - except the font itself.
% \end{abstract}
% \tableofcontents
%
% \clearpage
%
%
%\section{Introduction}
%\label{sec:intro}
%
% While such engines as \texttt{xetex} and \texttt{luatex} can use
% native system fonts, the installation base of \texttt{pdftex} is
% large enough to justify its continuing support with new fonts.  
%
%
% This package provides support files for the Monotype Imprint Shadow
% font.  According to the Fontname
% scheme~\cite{fontname}, this corresponds to the family |miih|.  We
% provide the necessary font files---everything but the fonts.
%
%
%
%\section{Installation}
%\label{sec:install}
%
%
%
% First, you need to purchase the fonts themselves: the |pfb| files
% are \emph{not} included in the package.  We assume that the |pfb|
% file is called |ImpriMTSha.pfb|.  If your \TeX{} system is
% TDS-compliant, install the this file into
% \path{$TEXMFLOCAL/fonts/type1/monotype/imprintmtshadow}. Download
% \url{http://mirrors.ctan.org/install/fonts/psfonts/imprintmtshadow.tds.zip}
% and unzip this file in \path{$TEXMFLOCAL}.  Add |+miih.map| to the
% configuration files of dvips, pdftex and your dvi previewer.  Run
% texhash and updmap programs to update the configuration files and
% file names database.
%
%
% The style |imprintmtshadow.sty| provides a number of commands for using the
% font family (see Section~\ref{sec:imprintmtshadow.sty})
%
%
%\section{Using \LaTeX{} Style }
%\label{sec:imprintmtshadow.sty}
%
% To use the package, add to the preamble of your document the usual
% incantation \cmd{\usepackage}\oarg{options}|{imprintmtshadow}|.
%
%
% The package option |scaled=...| scales the font to the given scale.
%
% The font can be selected in the usual way, for example
% \begin{verbatim}
% \fontfamily{miih}\selectfont
% \end{verbatim}
%
% \DescribeMacro{\imprintmtshadowfamily}
% \DescribeMacro{\textimprintmtshadow}
% Alternatively you can use a declaration |\imprintmtshadowfamily| and a
% command |\textimprintmtshadow| to set the family.  

%
%
% \StopEventually{
%   \clearpage
%
%   \bibliography{tex}
%   \bibliographystyle{unsrt}}
%
% \clearpage
%\section{Implementation}
%\label{sec:impl}
%
%\subsection{Identification}
%\label{sec:ident}
%
% We start with the declaration who we are.  Most |.dtx| files put
% driver code in a separate driver file |.drv|.  We roll this code into the
% main file, and use the pseudo-guard |&lt;gobble&gt;| for it.
%    \begin{macrocode}
%&lt;style&gt;\NeedsTeXFormat{LaTeX2e}
%&lt;*gobble&gt;
\ProvidesFile{imprintmtshadow.dtx}
%&lt;/gobble&gt;
%&lt;style&gt;\ProvidesClass{imprintmtshadow}
%&lt;miih-drv&gt;\ProvidesFile{miih-drv.tex}
%&lt;miih-map&gt;\ProvidesFile{miih-map.tex}
[2012/08/03 v1.0 Using Monotype Imprint Shadow font in LaTeX]
%    \end{macrocode}
% And the driver code:
%    \begin{macrocode}
%&lt;*gobble&gt;
\documentclass{ltxdoc}
\usepackage{booktabs}
\usepackage{url}
\usepackage[tableposition=top]{caption}
\usepackage{hypdoc}
\PageIndex
\CodelineIndex
\RecordChanges
\EnableCrossrefs
\begin{document}
  \DocInput{imprintmtshadow.dtx}
\end{document}
%&lt;/gobble&gt; 
%    \end{macrocode}
%
%
%
%\subsection{Fontinst Driver}
%\label{sec:miih-drv}
%
% This follows~\cite{fontinstallationguide}.
% 
% First, the preamble
%    \begin{macrocode}
%&lt;*miih-drv&gt;
\input fontinst.sty
\substitutesilent{bx}{b}
%    \end{macrocode}
%  
%
% Starting recording transforms:
%    \begin{macrocode}
\recordtransforms{miih-rec.tex}
%    \end{macrocode}
% We have only one font:
%    \begin{macrocode}
\transformfont{miih8r}{\reencodefont{8r}{\fromafm{ImpriMTSha}}}
%    \end{macrocode}
%
% There is no hook in |fontinst.sty| for writing our own preamble to
% |.fd| file.  However, we need to add scaling commands to the
% preamble. OK, we will patch fontinst:
%    \begin{macrocode}
\fontinstcc
\def\fd_family#1#2#3{
   \a_toks{#3}
   \edef\lowercase_file{\lowercase{
     \edef\noexpand\lowercase_file{#1#2.fd}}}
   \lowercase_file
   \open_out{\lowercase_file}
   \out_line{\percent_char~Filename:~\lowercase_file}
   \out_line{\percent_char~Created~by:~tex~\jobname}
   \out_line{\percent_char~Created~using~fontinst~v\fontinstversion}
   \out_line{}
   \out_line{\percent_char~THIS~FILE~SHOULD~BE~PUT~IN~A~TEX~INPUTS~
      DIRECTORY}
   \out_line{}
   \out_line{\string\ProvidesFile{\lowercase_file}}
   \out_lline{[
      \the\year/
      \ifnum10&gt;\month0\fi\the\month/
      \ifnum10&gt;\day0\fi\the\day\space
      Fontinst~v\fontinstversion\space
      font~definitions~for~#1/#2.
   ]}
   \out_line{}
%    \end{macrocode}
% Here is our patch:
%    \begin{macrocode}
   \out_line{\string\expandafter\string\ifx\string\csname\space
     MIIH@scale\string\endcsname\string\relax}
   \out_line{\space\string\let\string\MIIH@@scale\string\@empty}
   \out_line{\string\else}
   \out_line{\space\string\edef\string\MIIH@@scale\left_brace_char 
       s*[\string\csname\space MIIH@scale\string\endcsname]
       \right_brace_char\percent_char}
   \out_line{\string\fi\percent_char}
   \out_line{}
%    \end{macrocode}
% End of the patch.
%    \begin{macrocode}
   \out_line{\string\DeclareFontFamily{#1}{#2}{\the\a_toks}}
   {
      \csname #1-#2\endcsname
      \out_line{}
      \let\do_shape=\substitute_shape
      \csname #1-#2\endcsname
      \let\do_shape=\remove_shape
      \csname #1-#2\endcsname
   }
   \x_cs\g_let{#1-#2}\x_relax
   \out_line{}
   \out_line{\string\endinput}
   \close_out{Font~definitions}
}
\normalcc
%    \end{macrocode}
% 
%
% Now we install the fonts.  First T1
%    \begin{macrocode}
\installfonts
\installfamily{T1}{miih}{}
\installfont{miih8t}{miih8r,newlatin}{t1}{T1}{miih}{m}{n}{
  &lt;-&gt;\string\MIIH@@scale} 
\endinstallfonts
%    \end{macrocode}
%
%
% Then TS1
%    \begin{macrocode}
\installfonts
\installfamily{TS1}{miih}{}
\installfont{miih8c}{miih8r,textcomp}{ts1}{TS1}{miih}{m}{n}{
  &lt;-&gt;\string\MIIH@@scale} 
\endinstallfonts
%    \end{macrocode}
% 
% 
% And  OT1
%    \begin{macrocode}
\installfonts
\installfamily{OT1}{miih}{}
\installfont{miih7t}{miih8r,newlatin}{ot1}{OT1}{miih}{m}{n}{
  &lt;-&gt;\string\MIIH@@scale} 
\endinstallfonts
%    \end{macrocode}
%
%
% And the end:
%    \begin{macrocode}
\endrecordtransforms
\bye
%&lt;/miih-drv&gt;
%    \end{macrocode}
%
%\subsection{Fontmap Generation}
%\label{sec:fontmap}
%
% This is a standard procedure~\cite{fontinstallationguide}
%    \begin{macrocode}
%&lt;*miih-map&gt;
\input finstmsc.sty
\resetstr{PSfontsuffix}{.pfb}
\adddriver{dvips}{miih.map}
\input miih-rec.tex
\donedrivers
\bye
%&lt;/miih-map&gt;
%    \end{macrocode}
%
%
%
%\subsection{Style File}
%\label{sec:style}
%
%
% The scaling code is from the |helvet| package:
%    \begin{macrocode}
%&lt;*style&gt;
\RequirePackage{keyval}
\define@key{MIIH}{scaled}[1.00]{%
  \def\MIIH@scale{#1}}
\def\ProcessOptionsWithKV#1{%
  \let\@tempc\relax
  \let\MIIH@tempa\@empty
  \ifx\@classoptionslist\relax\else
    \@for\CurrentOption:=\@classoptionslist\do{%
      \@ifundefined{KV@#1@\CurrentOption}%
      {}%
      {%
        \edef\MIIH@tempa{\MIIH@tempa,\CurrentOption,}%
        \@expandtwoargs\@removeelement\CurrentOption
          \@unusedoptionlist\@unusedoptionlist
      }%
    }%
  \fi
  \edef\MIIH@tempa{%
    \noexpand\setkeys{#1}{%
      \MIIH@tempa\@ptionlist{\@currname.\@currext}%
    }%
  }%
  \MIIH@tempa
  \let\CurrentOption\@empty
}
\ProcessOptionsWithKV{MIIH}
\AtEndOfPackage{%
  \let\@unprocessedoptions\relax
}
%    \end{macrocode}
% 
%
% Some new commands:
%    \begin{macrocode}
\DeclareRobustCommand\imprintmtshadowfamily{\fontfamily{miih}\selectfont}
\DeclareTextFontCommand{\textimprintmtshadow}{\imprintmtshadowfamily}
%&lt;/style&gt;
%    \end{macrocode}
% 
%
%\Finale
%\clearpage
%
%\PrintChanges
%\clearpage
%\PrintIndex
%
\endinput
</pre></body></html>